动态VLAN详细配置实例

• vmps server配置

  To use VMPS, you first must create a VMPS database and store it on a TFTP server. The VMPS parser is line based. Start each entry in the file on a new line. The example at the end of this section corresponds to the information described below.
  
  The VMPS database can have up to five sections:
  
  Section 1, Global settings, lists the settings for the VMPS domain name, security mode, fallback VLAN, and the policy for VMPS and VTP domain name mismatches.
  
  Begin the configuration file with the Word "VMPS," to prevent other types of configuration files from incorrectly being read by the VMPS server.
  
  Define the VMPS domain. The VMPS domain should correspond to the VTP domain name configured on the switch.
  
  Define the security mode. VMPS can operate in open or secure mode. If you set it to open mode, VMPS returns an Access denied response for an unauthorized MAC address and returns the fallback VLAN for a MAC address not listed in the VMPS database. In secure mode, VMPS shuts down the port for a MAC address that is unauthorized or that is not listed in the VMPS database.
  
  (Optional) Define a fallback VLAN. Assign the fallback VLAN is assigned if the MAC addresses of the connected host is not defined in the database.
  
  In the example at the end of this section, the VMPS domain name is WBU, the VMPS mode is set to open, the fallback VLAN is set to the VLAN default, and if the VTP domain name does match the VMPS domain name, then VMPS sends an access denied response message.
  
  Section 2, MAC addresses, lists MAC addresses and authorized VLAN names for each MAC address.
  
  Enter the MAC address of each host and the VLAN name to which each should belong.
  
  Use the --NONE-- keyword as the VLAN name to deny the specified host network connectivity.
  

• [1] [2] [3] [4] 下一页 
• 复制本页网址和标题，发送给你QQ/Msn的好友一起分享
  
  
• 动态VLAN详细配置实例 相关文章：
• ·非主流QQFlash模块和动态横幅
• ·QQ空间开场动画免费拿的方法
• ·黑鹰行动军刀部队-完整攻略 - 游戏攻略
• ·用移动硬盘来安装Vista系统
• ·劳动法相关小案例:病假工资如何计算?
• ·Flash制作非常逼真的下雪视觉动画效果
• ·U盘启动电脑,USB移动硬盘启动电脑,USB外置光驱启动电脑
• ·用Msconfig设置XP启动项
• ·如何制作启动光盘
• ·Flash：闪动的星星
• 动态VLAN详细配置实例 相关软件
• ·万能显卡驱动
• ·万能声卡驱动
• ·《最终幻想12》超清晰CG动画
• ·万能摄像头驱动
• ·万能网卡驱动
• ·宫崎骏动画音乐合集
• ·霓虹灯动画制作软件 V5.50
• ·CS1.6 零点行动
• ·QQ搞笑表情gif动态图片集 V1.0 最新版
• ·小狗动态壁纸（二）

上一篇:一个端口划到多个VLAN

下一篇:小型企业VLAN组建方案

• 特别声明：本站除部分特别声明禁止转载的专稿外的其他文章可以自由转载，但请务必注明出处和原始作
• 者.文章版权归文章原始作者所有.对于被本站转载文章的个人和网站，我们表示深深的谢意。如果本站转
• 载的文章有版权问题请联系编辑人员,我们尽快予以更正. 转载请注明来源：http://www.hackhome.com

精品推荐

热点TOP10

特别推荐